Campervan electrical inspection and testing
An independent safety check of your off-grid electrics at our Cumbria workshop. It’s aligned with BS 7671, and you get a clear report at the end.
£295Inspection, test results and certification
Excellent · 33 Google reviewsWorkshop in Witherslack, 15 min from the M6One inspection, one clear price
For campervans, motorhomes and other off-grid systems, whether you built it yourself or someone else did.
- A free 30-minute video call to review your system before the inspection
- Electrical inspection and testing at our Cumbria workshop, 15 minutes from the M6
- An EICR or equivalent inspection report, aligned with BS 7671 where it applies
- £295 covers the inspection, test results and certification
Periodic inspection and testing, made simple
Off-grid systems run high currents through batteries, inverters and chargers. Testing finds problems you can't see.
Good times to book
- After finishing a DIY build
- When buying a used van or off-grid property
- Before long trips or full-time use
- After changes to the electrics
- When insurance or a sale needs a certificate
What it gives you
- Verified electrical safety
- A campervan or motorhome electrical certificate for insurance or resale
- Confidence the system will keep working
Real builds, start to finish
A few of the systems we have designed, built and looked after.
Inspection FAQs
What is electrical inspection and testing?
A structured check of the safety, condition and compliance of an existing system. It finds installation faults, safety risks and wear that you won't notice in normal use, which matters in off-grid systems.
Which systems do you inspect?
Campervans, motorhomes, off-grid cabins, tiny homes, retreats and fixed off-grid buildings. Both DIY and professionally installed systems.
Do you provide an EICR certificate?
Where it applies, you get an Electrical Installation Condition Report (EICR) or equivalent. It sets out the condition of the system, any issues found and what we recommend, aligned with BS 7671.
Why does an off-grid system need testing?
These systems often run higher currents and rely on batteries, inverters and chargers. Testing checks they are safe, properly protected and fit to keep using, which cuts the risk of faults, overheating or fire.
When should I book?
After a DIY build, when buying a used vehicle or off-grid property, before long trips or full-time use, after changes, or when insurance or a sale needs a certificate. Not sure? Get in touch.
Where is it done?
Usually at our Cumbria workshop, where we can test thoroughly with calibrated equipment. On-site inspection is available on request, subject to review.
Is this the same as an installation?
No. We assess the system you have rather than install or change it. We report what we find and can quote supply-and-fit remedial work using our own parts.
How long does it take?
It depends on the size of the system. Most inspections are done in one appointment, with results and paperwork once testing is finished.
How much does it cost?
£295, which covers the inspection, testing and documentation. If anything needs fixing, we can quote supply-and-fit remedial work using our own parts.
Do you help after the inspection?
Yes. We go through the results with you and advise on any improvements or next steps.
Book your inspection
Fill in the form to book your free 30-minute video call with Charlie. After we review your pre-inspection checklist, bring your campervan or motorhome to our Cumbria workshop.
- Free 30-minute callWith Charlie, our Lead Electrician.
- Pre-inspection checklistSo we know your system before you arrive.
- Workshop inspectionWitherslack, 15 minutes from the M6.
Inspections are carried out to check compliance with BS 7671, BS EN 1648-2 and PAS 63100, by qualified electricians following Victron Energy specifications, UK/EU regulations and site conditions. We give no warranty for pre-existing systems or modifications and accept no liability for non-compliant work.
Questions before you book?
Book a free 30-minute call and we’ll talk it through.