You wire your own van, and we make sure your self build campervan electrics are right. We design the system, supply the Victron kit, draw your self-build campervan wiring diagram and then commission it once it is built. Book a free 30-minute call to get started.
Tom, our founder, runs the free design calls. He holds the 18th Edition (BS 7671) and inspection and testing qualifications.
Planned it with an AI tool? Bring the plan along. Tom will tell you what’s right, what he’d change and why.
There are two routes, so pick the one that suits you.
First, tell us about your build and how you use power. Then we size the system, quote the kit and draw your wiring diagram.
Plan it with usThe system designer sizes your battery, charging and solar. It also lists every Victron part, cable, fuse and lug. Because it is a design aid, check it with us any time.
Open the system designerOrder your Victron kit through us and the Self-Build Package comes with it, with nothing to pay upfront. That way, your self build campervan electrics are sized and fused properly before you start.
All of this comes with your kit. For example, Flagship Gasless kit parts start from about £4,895.
Everything in step 3: audit, quote, wiring diagram, build guide, commissioning and community, plus one EICR at our Lake District base within 6 months of buying the kit. Booking required.
Included as standard with your kit, together with 12 months VRM support.
The package includes one EICR at our Lake District base within 6 months of buying the kit, booking required. After that, or for an extra visit, it is a paid add-on. This is an inspection report on your finished build, not a certificate of our work.
Design reviews and fault-finding, booked by the slot.
Not sure what you need? It all starts with step 1, a free call with Tom.
We specify every kit for your build on the call. For example, a typical campervan electrical kit has:
Rather start from a pre-wired board? Then see our ready-built boards.
We set up every system we design on Victron's VRM portal. As a result, you see your batteries, solar and loads from your phone.

Snapshot from one of our builds, shared read-only via Victron VRM. View live data on VRM
What customers say
“I wouldn’t work with anybody else, I’ve worked with Tom for my past three van builds.”Rach Harding
“It wasn’t just them trying to sell us something that was off the shelf.”Ben Jones-Gerrard
“They’ve done an absolute grand job writing us a schematic for all this.”Ali Vernett
“Some things are actually just better left to the experts.”Charlie Skinner
“We use a lot of appliances when we cook.”Vivian Forte
From Google
“Their schematics are incredible and have so much detail.”
“An incredibly helpful and interesting session with Tom reviewing our mostly built system.”
“I then built it and it performed brilliantly for my completely off-grid house in Greece.”
A free power audit, a component quote, a bespoke wiring diagram and build guide matched to your kit, remote commissioning once you've built it, 12 months of VRM support and lifetime access to our WhatsApp community. Commissioning is included and must be redeemed within 12 months of purchase. Book a free 30-minute call to get started.
Yes. The wiring diagram and build guide are released once you have bought your components through us.
That's who we built it for. The audit takes the guesswork out before you buy anything, the build guide follows the order you'll actually do the work in, and when you get stuck there's the WhatsApp group. If you'd rather the 230V side was checked by a qualified electrician, or left to us, say so on the call and we'll talk it through.
Every part in your kit, drawn where it sits in the system, with the cable size and fuse rating marked on each run: the leisure battery, distribution and isolator, MPPT solar charger, DC-DC charger from the alternator, the inverter charger if you're having 230V, and each 12V circuit. We draw it from your kit list, so you are not working from a generic diagram.
Book a paid consult if you get stuck: 30 minutes £45, 45 minutes £60 or 60 minutes £80. The Self-Build package includes one EICR at our Lake District base within 6 months of buying the kit, booking required. After that it is a paid add-on (£295). The EICR is an inspection report on your finished build. It is not TBE certifying the work you have done.
Almost always. Many newer vans, especially Euro 6 models, have smart alternators that drop their output once the starter battery is full. We use a Victron Orion DC-DC charger and set it up for your vehicle, so the leisure battery still charges on the move. Bring the make, model and year to the call.
The 230V side of a campervan falls under BS 7671, with Section 721 covering caravans and motor caravans, and must be checked by a qualified electrician. Amendment 4 is the current version. The 12V side follows BS EN 1648-2. Our designs follow both where they apply. Because you do the wiring, any paperwork has to come from testing the finished build. The Self-Build package includes one EICR at our Lake District base within 6 months of buying the kit, booking required. After that, it is a paid add-on. An EICR is an inspection report on the condition of your finished build. It is not a certificate that TBE designed or fitted the installation, and it is not TBE certifying your work.
The EICR (Electrical Installation Condition Report) is an inspection report on your finished build, carried out at our Lake District base. It records the condition of the installation we tested. It is not TBE certifying your work, and it is not an Electrical Installation Certificate (EIC). An EIC is issued only for installations we design and fit ourselves. The package includes one EICR within 6 months of buying the kit, booking required. After that, it is a paid add-on.
Everything goes tracked. In-stock items are usually dispatched in 1 to 2 working days. A Fogstar battery that's on pre-order is dispatched when Fogstar's next stock arrives, so its ETA is to be confirmed. Parcels go by courier. Heavy or bulky items, such as larger lithium batteries and solar panels, come on a tracked pallet, usually to the kerbside. We email you as each delivery leaves, with tracking and a list of what's in it.
Physical kits go to UK addresses only. If you're in the United States, message us and we can quote for a kit supplied within the US. Anywhere else, we offer digital design services only, such as your system design and wiring diagram. We don't do installations outside the UK.

Start with step 1, a free 30-minute call with Tom. Then we design your kit.