Description
The Victron Non-Inverting Remote On-Off Cable (ASS030550200) is a specialized cable designed to connect compatible Victron Energy devices to the VE.Bus BMS. It converts the remote on/off driver logic from the VE.Bus BMS to the required logic for specific Victron products, ensuring seamless integration and reliable operation.
Key Features
Compatibility:
This cable is compatible with the following devices:
- Skylla-TG (all models)
- Battery Protect models (BP40i, BP60i, BP200i – all discontinued)
Functionality:
The VE.Bus BMS uses a normally high logic, which opens the circuit in case of an alarm. However, the Skylla-TG chargers and Battery Protect models require an active pull-down to switch off. This cable translates the signal, making it possible to safely and correctly integrate these devices into a battery management system.
Wiring Instructions:
- For Battery Protect (BP40i, BP60i, BP200i):Connect the Non-Inverting Remote On-Off Cable between the Load-disconnect output of the VE.Bus BMS and the Battery Protect unit.
- For Skylla-TG Battery Chargers:Connect the Non-Inverting Remote On-Off Cable between the Charge-disconnect output of the VE.Bus BMS and the Skylla-TG charger.
Specifications
- Maximum Input Voltage: 70V
- Maximum Output Voltage: 70V
- Pull Down Activation: When input is free-floating or voltage is less than 2V
- Pull Down Current: ~30mA (Short Circuit Proof)
Datasheets
