
Authorised Victron Energy Installer
1 / 8
Authorised Victron Energy Installer
1 / 8The Blue Smart IP22 Charger is the professional battery charger with built-in Bluetooth. It can be used in the workshop and on motor vehicles such as cars, motorbikes, boats and campervans. These UK 230V models charge a 12V battery. Choose the charge current, the number of outputs, and whether you want the optional cable kit.
The Blue Smart IP22 Charger is the professional battery charger with built-in Bluetooth. It can be used in the workshop and on motor vehicles such as cars, motorbikes, boats and campervans.
Every variant on this page takes a 230V UK mains supply and charges a 12V battery. Choose the charge current (15A, 20A or 30A), 1 or 3 outputs, and whether you want the optional cable kit.
Bluetooth Smart
The wireless way to monitor voltage and current, change settings and update the charger when new features become available.
High efficiency
With up to 94% efficiency, these chargers generate up to four times less heat than a typical older charger. Once the battery is fully charged, power consumption falls to 0.5 W.
Adaptive 6-stage charge algorithm
Test, bulk, absorption, recondition, float and storage. A microprocessor automatically shapes the charge to how the battery is being used. Absorption, float and storage voltages, the recondition setting and temperature compensation can be programmed in the Bluetooth app.
Storage mode
If the battery has not been discharged for 24 hours, the charger lowers the float voltage to 13.2 V on a 12V battery, to cut gassing and corrosion. Once a week it raises the voltage back to the absorption level to equalise the battery.
Li-ion charging
Li-ion batteries are charged with a simple bulk, absorption and float algorithm. The charger will start even if the battery has been discharged to zero volts, and it will reconnect to a fully discharged Li-ion battery that has an internal disconnect.
Night and Low settings
In Night or Low mode the output current is limited to 50% of the rated figure and the charger is silent. Night mode ends after 8 hours. Low mode can be ended by hand.
Protected against overheating
Output current reduces as the temperature rises, up to 50 C, and the charger keeps running.
Status LEDs and history
Eleven LEDs show the charge stage (test, bulk, absorption, recondition, float, storage or ready) and the mode (normal 14.4 V, high 14.7 V, recondition or Li-ion). The history screen keeps lifetime usage data and detailed statistics for the last 40 charge cycles.
VE.Smart Networking
Up to ten Blue Smart chargers can work together over Bluetooth as if they were one larger charger, switching charge stages at the same time. A Smart Battery Sense, a battery monitor or a SmartShunt can also share battery voltage, temperature and current with the charger.
Free 30-minute call, Victron kit specified for your build, wiring diagram part for part.