Description
The Quattro-II 24/3000 combines advanced inverter and charger functionalities to provide a seamless power solution for split-phase 120/240V systems. It can accept two AC sources and automatically switch to the active input, ensuring a continuous power supply. With a maximum output power of 3000 VA and PowerAssist technology, it optimises energy usage by compensating for grid or generator limitations with battery power when needed.
When operating in inverter mode, the Quattro provides a steady 120V output and automatically adjusts to the available power source. It ensures that connected loads continue to operate without interruption, even during a grid failure, thanks to its quick transfer switch.
With the ability to connect multiple units for increased power or three-phase setups, the Quattro-II 24/3000 offers unparalleled flexibility and scalability. It also features a wide range of monitoring and control options, including remote access, ensuring easy system configuration and management.
Key Features
- Dual AC Inputs for flexibility between split-phase 120/240V or single-phase 120V sources.
- PowerControl and PowerAssist to prevent generator or grid overloads while boosting available power from the battery.
- Quick transfer time of <18ms for L1 and <40ms for L2, ensuring uninterrupted power for sensitive electronics.
- Parallel and Three-Phase Operation for scaling up to higher power outputs.
- Remote Monitoring and Control via VictronConnect app, VEConfigure, or Cerbo GX for easy system management.
- Continuous Power Output of 2400W at 25°C, with peak power of 5500W.
- Battery Temperature Sensor for optimal charging conditions.
- Built-in Protection for overload, high/low voltage, and temperature-related issues.
Specifications
- PowerControl & PowerAssist: Yes (on L1 input)
- Transfer Switch: 50 A
- Max AC Input Current: 50A (each leg)
- DC Input Voltage Range: 19-33V
- Inverter Output (120V): 120V ± 2%, 60 Hz ± 0.1%
- Continuous Output Power at 25°C: 2400W
- Peak Power: 5500W
- Max Efficiency: 94%
- Zero Load Power (Inverter Mode): 11W
- Charger AC Input: Split-phase: 180-280V AC (45-65Hz), Single-phase: 90-140V AC (45-65Hz)
- Charge Voltage 'Absorption': 28.8V
- Maximum Battery Charge Current: 70A
- Operating Temp Range: -40 to +65°C
- Protection: Short circuit, overload, high/low voltage, temperature, etc.
- Auxiliary Output: 50A (each leg)
- Weight: 22.5 kg / 50 lbs
- Dimensions (HxWxD): 579 x 319 x 168 mm / (23 x 13 x 7 inches)
- Material & Colour: Steel, blue (RAL 5012)
- Protection Category: IP22
- Battery-Connection: 2 M8 bolts
- Warranty: Please contact your dealer for support and repairs.
Datasheets
