Description
This PWM solar charge controller ensures efficient battery management by preventing over-discharge with its adjustable load output that disconnects the load once the battery reaches a preset voltage. The programmable battery charge algorithm is compatible with AGM, GEL, Flooded, and LiFePO4 batteries, ensuring optimal charging for each battery type. With day/night timing and adjustable connect/disconnect voltages, you have complete control over your system's performance.
The Victron BlueSolar controller also features a common positive grounding design and IP20 protection, making it suitable for use in various indoor applications.
Key Features
Liquid crystal display
For status monitoring and set-up
Load output
Over-discharge of the battery can be prevented by connecting all loads to the load output. The load output will disconnect the load when the battery has been discharged to a pre-set voltage.
Some loads (especially inverters) can best be connected directly to the battery, and the inverter remote control connected to the load output. A special interface cable may be needed, please see the manual.
The connect and disconnect voltages are adjustable.
Day/night timing of the load output
This option allows for a pre-set ON-time after dusk.
Programmable battery charge algorithm
Preprogrammed algorithms for AGM, GEL, Flooded or LiFePO4 batteries (with internal BMS only)
Two 5 Volt USB outputs
Maximum current (both outputs combined): 2A
Specifications
- Brand: Victron Energy
- Manufacturer Part Number: SCC010020050
- GTIN: 8719076046202
- Battery Voltage: 12/24 V automatic system voltage detection
- Rated Charge Current: 20A
- Maximum Solar Voltage: 28V / 55V
- Load Output: Manual control + low voltage disconnect + timer
- Grounding: Common positive
- IP Rating: IP20
- Dimensions: H96 x W169 x D36mm
- Weight: 0.15Kg
- Warranty: 5 Years
Datasheets
